12
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: P10034AP-M4/H PRODUCT CODE:37981 05/2014
Instructions (Cont.)
Two-stage cooking
Some recipes may require two stages of cooking at
different power levels.
To set the oven for a two-stage cooking program:
1. To set stage 1
, follow steps 1 to 3 in "One-stage cooking", above,
but
DO NOT
press
START/STOP.
2. To set stage 2,
press the
COOK
pad, then enter the appropriate cooking
time and a (lower) power level. (Most two-stage recipes use a lower power
level for the second stage.)
3. Press the
START/STOP
pad.
NOTE:
A signal will sound at the end of stage 1 to alert you of the start of stage 2.
Press
Pad
Power
Level
START
100%
9
90%
8
80%
7
70%
6
60%
5
50%
4
40%
3
30%
2
20%
1
10%
One-stage cooking
1. Use the number pads to set the cooking time (from
one second to 99 minutes and 99 seconds).
2. To cook with full power (100%), press the
START/
STOP
pad to start cooking.
3. To set a power level other than 100% power, press
the
POWER LEVEL
pad, then use the number pads to
enter the power level (see the table on the right).
4. Press the
START/STOP
pad to start cooking.
5. To check the power level when cooking is in progress,
simply press the
POWER LEVEL
pad.
Cook by weight
For this cooking program you enter the weight of the meat (beef, lamb, pork) to
be cooked and the oven will set the cooking time automatically. (Meat must be
defrosted and at refrigerated temperature.) Details of each program are in the
table on the opposite page.
1. Press the
COOK BY WEIGHT
pad.
2. Use the number pads to enter the code (1 - 3).
3. Use the number pads to enter the weight of the meat to be cooked.
4. Press the
START/STOP
pad to start cooking.
5. During cooking the oven will pause and beep to remind you to turn the food
over for even cooking. Press the
START/STOP
pad again to resume cooking.