Still RX50-10, Original Instructions Manual

Page: 359 / 374

Technical data
7
Ergonomic dimensions
0000_003-002
40 mm
Ergonomic dimensions
WARNING
Danger of impact injuries to the head!
If the head of the operator is located too close to the
underside of the roof, the suspension of the driver’s
seat or an accident may cause the head to strike the
overhead guard.
To avoid head injuries, a minimum distance of
40 mm must be ensured between the underside of
the roof and the head of the tallest operator.
To determine the actual head clearance, the opera-
tor must sit in the driver’s seat and the seat suspen-
sion must be set to this driver’s requirements.
Due to the individual nature of height and body
weight as well as the wide variety of types of driver’s
seat and overhead guard, the minimum head
clearance must be ensured in every truck.
The driver’s compartment has been designed
taking ergonomics in the workplace into
account and in accordance with EN ISO 3411.
In general, from the seat position, the operator
has sufficient space to reach the operating
devices safely, to operate the truck and to view
the outline of the truck. Operators whose body
size deviates from the specified dimensions
on which EN ISO 3411 is based must be
individually considered by the operating
company.
55048011501 EN - 12/2015 347