Still RX50-10, Original Instructions Manual

Page: 175 / 374

Operation
5
Working with loads
Type-Modèle-Typ / Serial no.-No. de série-Serien-Nr. / year-année-Baujahr
Rated capacity
Capacité nominale
Nenn-Tragfähigkeit
Battery voltage
Tension batterie
Batteriespannung
Rated drive power
Puissance motr.nom.
Nenn-Antriebsleist.
Unladen mass
Masse à vide
Leergewicht
max
min.*
* see Operating instructions
voir Mode d'emploi
siehe Betriebsanleitung
kg
kg
kg
kg
kg
kW
V
*
1
3
2
6210_001-016_V2
Determining the actual total weight
– Park the truck securely, see ⇒ Chap-
ter "Parking the truck securely and switch-
ing it off", P. 5-282.
– Determine the unit weights by reading the
truck nameplate and, if necessary, the
attachment (variant) nameplate and, if
necessary, by weighing the load to be lifted.
– Add the determined unit weights to obtain
the actual total weight of the truck:
Tare weight (1)
+ Max. permissible battery weight (2)
+ Ballast weight (variant) (3)
+ Net weight of attachment (variant)
+ Weight of the load to be lifted
+ 100 kg allowance for the driver
= Actual total weight
– Drive the truck with the forks forwards into
the lift without touching the shaft walls.
– Park the truck securely in the lift, see
⇒ Chapter "Parking the truck securely
and switching it off", P. 5-282, to prevent
uncontrolled movements of the load or the
truck.
55048011501 EN - 12/2015 163