Still FXH 20, Original Instructions Manual

Page: 125 / 140

Maintenance
5
Hydraulic systems
Hydraulic systems
Checking the hydraulic system for
leaks
– Switch off the truck and disconnect the
battery connector.
– Move the seat all the way forwards.
– Open the technical compartment door.
– Inspect the hydraulic system: pipes, hoses
and connections between the pump unit
and the cylinders.
– Check the cylinders for leaks.
– Check that the hoses are attached correctly
and show no signs of friction wear.
– Check the external pipes and hoses on the
technical compartment.
– Close the technical compartment door.
– Return the truck to service.
CAUTION
Risk of damaging the truck
In the event of leakage, please contact the After-
Sales Service Centre.
Checking the hydraulic oil level
To check the hydraulic oil level, proceed as
follows:
– Immobilise the truck.
– Lower the load arms.
– Switch off the ignition and remove the key.
– Press the emergency off switch.
– Disconnect the battery connector.
– Move the seat all the way forwards.
– Open the technical compartment door.
To ensure correct operation of the truck
functions, the oil level must be between the
minimum mark (3) and maximum mark (2) on
the tank.
11548011751 EN - 10/2018 117