4
Use
Handling the battery
– Before charging, check the condition of
the battery cable and the charger cable.
Replace them if necessary.
– Open the hood and leave open.
– Remove the battery handle connector (1)
from the truck plug (2).
– Connect the battery connector to the
wall-mounted connector.
WARNING
Electrical risk
Only unplug the battery connector from the battery
charger when both the battery charger and truck
are switched off.
NOTE
Follow the instructions provided by the battery
and battery charger manufacturers (equali-
sing charge).
WARNING
Risk of damage, short circuit or explosion.
Do not place any metallic objects or tools on the
battery.
Smoking is prohibited.
WARNING
The electrolyte (diluted sulphuric acid) is toxic and
very caustic.
Follow the safety regulations when handling battery
acid.
WARNING
Explosive gases are generated during battery
charging.
– Make sure that the area is well-ventilated.
– Make sure that the battery hood remains open
for the entire time the battery is charging.
84
11648011651 EN - 09/2019
Summary of Contents for FXD 20 N
