Still FXD 20 N, Original Instructions Manual

Page: 109 / 142

Maintenance
5
General maintenance information
Servicing and maintenance personnel training and qualification
Truck maintenance must only be carried out
by qualified and authorised personnel.
The annual inspection for prevention of
accidents at work must be carried out by a
person qualified to do so. The person carrying
out this inspection must provide their expertise
and opinion without being influenced by
economic factors or company internal issues.
Safety is the only critical deciding factor.
The person responsible for carrying out the
inspection must have sufficient knowledge
and experience to be able to assess the
condition of the truck and the efficiency of
the protective installations in accordance
with the technical regulations and principles
established for checking industrial trucks.
Battery maintenance staff
Batteries must only be recharged, maintained
and changed by specially trained personnel.
Personnel must follow the manufacturer's
instructions of the battery, the battery charger
and the truck.
It is essential to follow the battery maintenance
instructions and the battery charger operating
instructions.
Maintenance operations that do not require special training
Simple maintenance operations such as
checking the hydraulic fluid level or checking
the battery electrolyte level can be carried out
by persons with no special training.
A specific qualification is not necessary.
Refer to the maintenance section of this
manual for further information.
Ordering spare parts and consumables
Spare parts are provided by our spare parts
service department. You will find the infor-
mation required to place an order in the spare
parts and fitting catalogue.
Only use spare parts recommended by the
manufacturer.
Unauthorised spare parts may increase the
risk of accidents due to faults relating to
quality or incorrect choices. Anyone who uses
non-compliant spare parts must assume full
responsibility in the event of an accident.
11648011651 EN - 09/2019 99