Still FXD 20 N, Original Instructions Manual

Page: 51 / 142

Use
4
Driver's compartment settings
Driver's compartment settings
Adjusting the seat
The seat is equipped with an operator pres-
ence detector.
The operator must adjust his weight by
increments of 10 kg to trigger this detection.
Proceed as follows:
– Sit on the seat
– Turn the adjustment wheel (1) until the
desired weight is reached
– Put the truck into service
The seat's operator presence detector cannot
be activated if the weight setting is too high or
too low.
This operation also enables you to adjust the
hardness of the seat.
Adjusting the floor
The floor is fitted with a pressure-based height
adjustment system.
To adjust the floor height, proceed as follows:
– Sit on the seat.
– Press the floor unlocking button (2) and hold
it down for the duration of the operation.
– Exert pressure on the floor (3) by pushing
it with your legs to obtain a good driving
position.
– Release the button.
NOTE
Adjusting the floor is not possible when the
truck is in cold store. The cylinder for adjust-
ment does not work at low temperatures.
11648011651 EN - 09/2019 41