Still FXD 20 N, Original Instructions Manual

Page: 86 / 142

4
Use
Transporting loads
– Raise the load arms (2) to lift the load from
the ground.
– Lower load (Q1) again as close as possible
to load (Q2) before driving.
CAUTION
Risk of crushing goods
Make sure that there is enough space above load
(Q2) so as not to crush the top of the pallet.
– Reverse the truck slowly to withdraw the
pallets from the racking.
CAUTION
The total load (Q1) + (Q2) must not exceed 2000 kg.
Q1 must be less than Q2 (for details, read the
double pallet stacker label in chapter 4: Capacity).
Transporting two loads
Observe the following recommendations:
• The normal direction of travel is forwards
• Always travel up or down slopes with the
load uphill
• In the event of poor visibility, move slowly
and carefully and work with guidance
• Do not travel with a load (Q1) on the forks if
there is no load (Q2) on the load arms above
300 mm from the ground
• The heavier of the two loads (Q2) must be
placed down on the load arms
• Keep the upper load (Q1) as close as
possible to load (Q2) at all times
Setting down two loads
– Carefully move the truck to the desired area.
– Raise the forks clearly above the level
where the load is to be placed.
– Slowly move the loads towards the racking.
– First of all, place the lower pallet on the
ground and then place the upper pallet on
the first level.
– Slowly withdraw the truck in a straight line.
– Lower the forks again.
76 11648011651 EN - 09/2019