Still FXD 20 N, Original Instructions Manual

Page: 49 / 142

Use
4
Operation of operator presence detection
Operation of operator
presence detection
The truck is equipped with two operator
presence detectors:
• The chair (2)
• The presence pedal (1)
These two components are truck safety
devices.
First, the forklift operator must sit on the chair
(2). The operator detection contact is then
activated.
The forklift operator presence pedal (1) must
then be depressed before and while the truck
is moving.
The pedal allows you to operate all the controls
of the truck.
In reverse travel (fork direction), it is possible
to rise from the chair in the event of poor
visibility. The truck then travels at 2 km/h.
The forklift operator presence pedal must be
kept depressed.
Before rising from the chair, it is essential to
slow down the truck to a very low pace and to
check the working environment.
WARNING
Risk of injury
Do not rise from the chair when the truck is travelling
at full speed.
NOTE
Do not rise from the chair to slow down the
truck.
If the forklift operator sits down again, the
truck continues to travel at a limited speed.
The drive switch must be released. When the
forklift operator presses the drive switch, the
truck returns to its normal speed.
11648011651 EN - 09/2019 39