Still FXD 20 N, Original Instructions Manual

Page: 65 / 142

Use
4
Driving
Rear of the joystick
The rear of the joystick is used to:
• Sound the horn
• Raise or lower the load arms
Horn
– Press the button (5) on the joystick.
Raising the load arms (initial lift)
– Press the button (6) on the joystick.
Lowering the load arms (initial lift)
– Press the button (7) on the joystick.
Steering Knob option
The Steering Knob device can replace the
steering wheel controls.
WARNING
Risk of sharp truck movement
The Steering Knob device is highly sensitive. It is
important to handle the turning knob with caution.
The turning knob allows you to adjust the
position of the wheel. There is no need to
reposition it when driving if the trajectory is
straight.
When the button is positioned in the centre at
the zero point (1), the truck travels in a straight
line.
Two stops, one on the left (2) and one on
the right (3), delimit the axis of rotation. The
operator adjusts the turning knob within this
axis to drive.
In forward travel (opposite direction to the
forks)
– Move the turning knob to the left (anti-
clockwise) (2) to turn to the left
– Move the turning knob to the right (clock-
wise) (2) to turn to the right
In reverse travel (fork direction)
11648011651 EN - 09/2019 55