Still CX-T-40 Original Instructions Manual Download Page 75

Page: 75 / 146

Operation

Driving

1044_501-007

1050_003-006

CAUTION

Take care when operating, especially if the user is

not familiar with using this function.

DANGER

Risk of crushing feet.
Do not use this function for turning.
This function is designed to maintain à straight line.
Proceed from the cockpit with very slight move-

ments.

Driving forward with traction button

– Press traction button (5). The truck will drive

forward; the travel speed will be limited to

2,5 km/h.

CAUTION

Truck speed can not be controlled. You must walk

beside the truck.

– To stop, release traction button (5). The

truck will come to a stop.

Reversing with traction button

– Press traction button (4). The truck will

reverse; the travel speed will be limited to

2,5 km/h.

CAUTION

Truck speed can not be controlled. You must walk

beside the truck.

– To stop, release traction button (4). The

truck will come to a stop.

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands