Still CX-T-40 Original Instructions Manual Download Page 119

Page: 119 / 146

Maintenance

Maintenance as required

123

456

789

PRG

1044_606-008

1044_606-016

Charging the lead battery

WARNING

The battery could be damaged, shorted or an

explosion could occur.
Do not place any metallic objects or tools on the

battery. No naked lights, no smoking permitted!

WARNING

The electrolyte (diluted sulphuric acid) is poisonous

and caustic!
Follow the safety precautions for handling battery

electrolyte.

– Press the

PRG ↑

(scrolling) button (1) to

display the existing battery charge (2).

NOTE

After the battery is connected, the correct state

of charge appears only after approx. 1 minute.

Charging the gel battery

– Refer to instructions for this battery.

WARNING

Disconnect the battery plug only when the truck and

charger are switched off.

51048070007 [EN]

111

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands