Still CX-T-40 Original Instructions Manual Download Page 118

Page: 118 / 146

Maintenance

Maintenance as required

Battery maintenance precautions

Keep the battery cell lid dry and clean. Neu-

tralise spilled electrolyte immediately. Termi-

nals and cable lugs should be clean, slightly

greased with terminal grease and screwed on

securely.

Battery charging

During charging, keep the surface of the

battery cells exposed in order to provide

sufﬁcient ventilation. Do not place any metallic

objects on the batteries. While charging the

battery keep battery cover open.

Battery type

Lead or gel batteries are used as traction

batteries. As the various types are structured

differently, always use the correct type of

charging device without fail. Before charging,

check if the battery charger is suitable for your

battery!

CAUTION

Gel batteries are subject to special charging/mai-

ntenance and handling regulations. Use of the

wrong type of charging device can result in total

battery failure.
Always obey the instructions issued by the relevant

manufacturer.

NOTE

The factory setting of the battery charge

indicator is for a lead battery. The indicator

can also be set to a gel battery. Please contact

your Service.

110

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands