Still CX-T-40 Original Instructions Manual Download Page 65

Page: 65 / 146

Operation

Commissioning

123

456

789

PRG

1044_505-006

NOTE

The factory setting of the battery charge

indicator is for a lead battery. The indicator

can also be set to a gel battery. Please contact

your Service.

• If a residual charge of 20% is reached, the

battery must be charged soon.

• The driving speed is reduced.

CAUTION

Deep discharging damages the battery.
The battery must immediately be charged as deep

discharging begins.

123

456

789

PRG

1044_505-006

1044_505-018

Display of time to next servicing

– Press the

PRG ↑

(scrolling) button (4) to

display the time remaining until the next

scheduled servicing. The time is shown in

hours (6) and with the symbol of a spanner

(5). Have the maintenance carried out

according to service hours speciﬁed in the

maintenance schedule.

NOTE

The display of the time to the next servicing

can be set by your Service. Please contact

your Service in this regard.

– The display can show subsequent informa-

tion ⇒ Chapter "Error code", P. 5-88.

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands