Still CX-T-40 Original Instructions Manual Download

Page: 93 / 146

Operation

Digicode

1044_505-016

– Scroll with the

PRG ↑

(scrolling) button (6)

until

USEr

(7) appears in the display.

1044_505-011

– Conﬁrm with the

PRG ↲

(enter) button (4)

until

Add

(10) appears in the display.

1044_505-012

– Conﬁrm with the

PRG ↲

(enter) button (4).

A ﬂashing line cursor (8) will appear in the

display.

– Enter the new 4-digit driver’s code with the

buttons (1), (2) or (3) as described above.

NOTE

The controller can store a maximum of 200

driver’s codes. If one attempts to add a 201st

driver’s code,

Err

will appear in the display.

1044_505-013

– Conﬁrm with the

PRG ↲

(enter) button (4)

until the new driver’s code (9) blinks (an

example is shown).

1044_505-011

– Then release the button.

Add

(10) will

appear again in the display.

1044_505-014

– Press the

PRG ↑

(scrolling) button (6) until

a normal readout (11) (eg battery charge)

appears in the display. The new driver’s

code is entered.

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands