ASTOPAD
®
Instructions for Use
23
6.4 Control panel
Fig. 3 Control panel
No. Designation
Description
1
Actual temperature
A or B
Displays the actual temperature of the applied part
2
Set temperature
A or B
Displays the selected set temperature of the applied
part.
3
“Temperature
increase” button
A or B
Press this button to increase the set temperature in
increments of 0.5 °C.
4
“Temperature
decrease” button
A or B
Press this button to decrease the set temperature in
increments of 0.5 °C.
5
Alarm indicator
Displays the corresponding alarm code in an alarm
situation.
6
“Start” button
“Start” LED (green)
A or B
Press this button to start the heating process
or
Press this button to confirm a change made to the set
temperature.
7
“Stop” button A or B
Ends the heating process and switches off the respec-
tive output.
8
Battery status
indicator
Indicates the current battery status.
9
“Standby” button
“Standby” LED (blue)
The Standby button switches between the
Standby
mode
and the
On mode
.
10
“Alarm” LED (yellow)
LED flashes or turns on and the acoustic alarm signal
sounds when there is an alarm situation.
11
Display
Informs the user of temperatures and fault conditions.
