1 Introduction
ASTODIA Instructions for Use
11
1.4 Symbols
Symbols and indications on the control panel
Switch key for LED-colours - press shortly
OFF button - press and hold (ca. 1 s)
ON button
Reduce the light intensity
ON button
Increase the light intensity
Where applicable, these symbols appear at the appropriate location on the
patient warming system, on the packaging, on the identification plate, or in the
accompanying documentation.
This symbol states that this device is a Type BF applied part to
standards IEC/EN 60601-1 and VDE 0750 Part 1.
IPX 0
This symbol indicates following IEC/EN 60529 that this device
does not have specific protection against humidity.
Observe the instructions for use.
General warning/danger symbol
REF
Reference (part) number
SN
Serial number
Year of manufacture
Manufacturer
This symbol on the control unit indicates that this device complies
with the requirements of the Medical Devices Directive 93/42/ECC
of 14 June 1993.
Warning of optical radiation. Do not aim LED directly at the eyes!
Electrical devices are recoverable waste and should not be dis-
posed of in domestic waste at the end of their service life.
Batteries and rechargeable batteries are recoverable waste and
should not be disposed of in domestic waste at the end of their
service life.
Summary of Contents for ASTODIA DIA100
Page 27: ......
