ASTODIA Instructions for Use
4 Start-up
18
1
Start the device directly with the keys or on the lowest light level.
The device is, after of the LEDs flashed, preset to start with the red LED col-
our as standard.
Infinitely variable light intensity is set by pressing and holding (for at least
0.5 s) the / key.
If you press the button for a short time, you can change the light intensity.
The colour changes from RED to YELLOW and vice versa by pressing this
key .
The transillumination effect can significantly be improved if you dim the
surrounding light.
2
If the device is constantly operated with the highest light level, it will automati-
cally switch over to the next lower level after 2 minutes.
3
If the unit is switched on for about 5 minutes and no key is actuated during
this time, it will automatically switch off to save the battery power.
4
If the battery power is low, the LED which is working at that time will start
flashing. This warning can be suppressed for 5 minutes by shortly pressing
any button. This can be repeated until the battery voltage reaches a critical
value and the device automatically switches off.
4.3 End operation
Switch the device off by pressing and holding the key (for about 1 s).
4.4 Charging the batteries
To charge the integrated batteries only use the charger provided with the basic
equipment and follow exactly the instructions of the charger.
WARNING
Risk of electric shock!
During charging, the device shall not be in the patient environment.
Summary of Contents for ASTODIA DIA100
Page 27: ......
