► While combing the branches, turn the rakes to
and fro around the shaft's axis (C) if neces‐
sary.
► Have the whole tree even if there is very little
fruit left on it.
► Do not hold the unit in one spot for too long so
as not to damage leaves and branches unnec‐
essarily.
► Always shut off the engine before leaving the
unit unattended.
414BA005 KN
1
NOTICE
Operating the unit with broken and/or missing
tines (1) may result in damage to gearbox com‐
ponents or overload them. Therefore, do not con‐
tinue using a unit with broken and/or missing
tines.
Operating the unit with broken and/or missing
tines reduces the unit's harvesting performance.
► Always replace damaged tines – see chapter
on "Inspection and Maintenance by User".
4
Assembling the Unit
4.1
Mounting the Gearbox
414BA006 KN
► Place the power tool on the ground so that it
rests on the machine support (arrow).
1
414BA007 KN
1
► Loosen the clamp screws (1) on the gearbox –
do not remove them.
413BA014 KN
► Pull the protective cap off the end of the drive
tube.
002BA248 KN
English
4 Assembling the Unit
8
0458-422-0121-D