16.1.2
Adjusting the Throttle Cable
0208BA043 KN
► Depress the throttle trigger lockout (1) and the
throttle trigger (2) as far as stop and hold them
in that position.
Apply only sufficient pressure to hold the levers
against their stops.
► Rotate screw in throttle trigger 1/2 turn coun‐
terclockwise.
► Release the throttle trigger and throttle trigger
lockout.
► Start the engine and check the adjustment.
► Shut down the engine and repeat adjustment if
necessary.
16.1.3
Replacing Tines
414BA010 KN
A set of 4 tines is available as a special acces‐
sory – see "Special Accessories” for part num‐
ber.
► Broken, badly worn and missing tines must be
replaced immediately with new tines.
414BA020 KN
1
16 mm
4
4
3
2
2
► Engage the combination wrench (2) on the
hexagon (3) at the base of the tine (1).
► Use the combination wrench to loosen the
tine.
► Unscrew the tine from the rake (4).
414BA027 KN
1
3
4
► Screw the tine (1) into the rake (4) as far as
possible by hand.
English
16 Inspection and Maintenance by User
18
0458-422-0121-D