► Engage the combination wrench (2) on the
hexagon (3) at the base of the tine (1) and
screw down as far as stop.
414BA028 KN
3
2
► Use the combination wrench (2) to tighten
down the tine firmly by turning it another 30° to
40°.
17 Inspections and Mainte‐
nance by Dealer
17.1
Maintenance work
STIHL recommends that all maintenance and
repairs be carried out by STIHL dealers.
17.2
Fuel pickup body in tank
0208BA044 KN
► Check the pickup bodies in the fuel tank annu‐
ally and have them replaced when necessary
The pickup bodies should be located in the tank
in the areas shown in the figure.
17.3
Antivibration element
0208BA045 KN
A vibration-absorbing rubber element is installed
between the powerhead and the shaft. Have it
checked in the event of noticeable wear or con‐
stantly increased vibration.
18 Maintenance and Care
The following intervals apply to normal operating
conditions only. If your daily working time is longer
or operating conditions are difficult (very dusty work
area, etc.), shorten the specified intervals accord‐
ingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete machine
Visual inspection (condi‐
tion, leaks)
X
X
Clean
X
Replace any damaged
parts
X
17 Inspections and Maintenance by Dealer
English
0458-422-0121-D
19