background image

414BA024 KN

1

3

► Use the combination wrench (3) to tighten

down the tine (1) firmly by turning it another

30° to 40°.

► Remove the combination wrench from the tine.

5

Fuel

Your engine requires a mixture of gasoline and

engine oil.

WARNING

For health reasons, avoid direct skin contact with

gasoline and avoid inhaling gasoline vapor.

5.1

STIHL MotoMix

STIHL recommends the use of STIHL MotoMix.

This ready-to-use fuel mix contains no benzol or

lead, has a high octane rating and ensures that

you always use the right mix ratio.
STIHL MotoMix uses STIHL HP Ultra two-stroke

engine oil for an extra long engine life.
MotoMix is not available in all markets.

5.2

Mixing Fuel

NOTICE

Unsuitable fuels or lubricants or mix ratios other

than those specified may result in serious dam‐

age to the engine. Poor quality gasoline or

engine oil may damage the engine, sealing rings,

hoses and the fuel tank.

5.2.1

Gasoline

Use only high-quality brand-name gasoline with

a minimum octane rating of 90 – leaded or unlea‐

ded.
Gasoline with an ethanol content of more than

10% can cause running problems in engines with

a manually adjustable carburetor and should not

be used in such engines.

Engines equipped with M-Tronic deliver full

power when run on gasoline with an ethanol con‐

tent of up to 25% (E25).
5.2.2

Engine Oil

If you mix the fuel yourself, use only STIHL two-

stroke engine oil or another high-performance

engine oil in accordance with JASO FB, JASO

FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-

EGD.
STIHL specifies STIHL HP Ultra two-stroke

engine oil or an equivalent high-performance

engine oil in order to maintain emission limits

over the machine’s service life.
5.2.3

Mix Ratio

STIHL 50:1 two-stroke engine oil: 50 parts gaso‐

line to 1 part oil
5.2.4

Examples

Gasoline

STIHL engine oil 50:1

Liters

Liters

(ml)

1

0.02

(20)

5

0.10

(100)

10

0.20

(200)

15

0.30

(300)

20

0.40

(400)

25

0.50

(500)

► Use a canister approved for storing fuel. Pour

oil into canister first, then add gasoline and

mix thoroughly.

5.3

Storing Fuel

Store fuel only in approved safety-type fuel can‐

isters in a dry, cool and safe location protected

from light and the sun.
Fuel mix ages – only mix sufficient fuel for a few

weeks work. Do not store fuel mix for longer than

30 days. Exposure to light, the sun, low or high

temperatures can quickly make the fuel mix

unusable.
STIHL MotoMix may be stored for up to 2 years

without any problems.

► Thoroughly shake the mixture in the canister

before fueling your machine.

WARNING

Pressure may build up in the canister – open it

carefully.
► Clean the fuel tank and canister from time to

time.

English

5 Fuel

10

0458-422-0121-D

Summary of Contents for SP 92

























Reviews: