Stihl RMI 632, Instruction Manual

Page: 88 / 90

0478 131 8349 A - EN
86
Divided mowing area – the robotic mower
cannot travel independently from one
mowing area to the other.
Docking station :
Location (1) directly next to the houses A
No-go areas :
Installation around the free-standing tree
and around the vegetable patch
B based
on a linking section installed at right angles
to the edge.
Wire clearances : ( Ö 12.5)
Clearance to adjoining area that can be
travelled on (e.g. patio) with a stepped
area height of less than +/- 1 cm:
0 cm
Clearance to high obstacles: 33 cm
Clearance to the tree: 33 cm
Minimum wire clearance in the confined
areas behind the vegetable patch:
54 cm
Secondary area :
Installation of a secondary area C , linking
section (3) on the patio accommodated in
a cable duct.
Programming :
Define the size of the mowing area
(without secondary area), program one
starting point (4) in the confined area for
using the offset drive home function
(
Ö 11.14) – starting frequency 2 of 10
operations ( Ö 11.15)
Points to note :
Bring the robotic mower to the secondary
area several times per week and activate
the command "Start mowing". (
Ö 11.5)
Take the mowing performance into
account. (
Ö 14.4)
If necessary, install two separate mowing
areas with 2 docking stations.