MS 461 R
English
5
Fitting the holder
N
Coat inside of hole (a) with STIHL
OH 723 press fluid or washing-up
liquid.
N
Push the holder (2) onto the wrap-
around handlebar so that the
recess (b) is as shown in the
illustration.
N
Position the holder (2) with the
recess (b) as shown in the
illustration.
Assembling wrap-around handlebar
N
Push bracket (3) onto center
strut (4) and secure to end (5) of
handlebar with M5x20 screw (6)
and washer (7).
Mounting wrap-around handlebar
N
Slip the handlebar (b) over the saw
from the rear and bring it into
position.
N
Fit the P6x32.5 screws (2).
N
Insert and tighten down the existing
P6x19 screws (3).
N
Fit the combination wrench in the
holder.
179BA039 KN
a
2
b
4
5
3
147BA006 KN
6
7