![background image](http://html1.mh-extra.com/html/stihl/hl-km/hl-km_instruction-manual_1378706045.webp)
23
KM 110, KM 130
English / USA
Tool moves when engine is idling
:
Turn idle speed screw (
LA
) slowly
counterclockwise until tool stops
moving and then turn the screw
about another 1/2 to 3/4 turn in the
same direction.
Erratic idling behavior, engine stops
even though setting of LA screw is
correct, poor acceleration
Idle setting too lean:
:
Turn low speed screw (
L
)
counterclockwise until the engine
runs and accelerates smoothly.
Erratic idling behavior
Idle setting too rich:
:
Turn low speed screw (
L
) clockwise
(no further than stop) until the
engine runs and accelerates
smoothly.
The spark arresting screen is an option
that is not fitted in all machines.
:
If the engine is low on power, check
the spark arresting screen in the
muffler.
:
Wait for muffler to cool down.
:
Move slide control to
STOP-O
.
:
Remove the screw (
1
).
:
Remove the screws (
2
).
:
Lift away the shroud
(
3
).
:
Remove the screw (
4
).
:
Lift spark arresting screen
(
5
) and
pull it out.
:
Clean spark arresting screen if
necessary – if screen is damaged or
coked up, fit a new one.
:
Refit the spark arresting screen.
:
Insert screw and tighten down.
:
Fit the shroud.
Spark Arresting Screen in
Muffler
249BA033 KN
1
2
3
2
249BA034 KN
Summary of Contents for HL-KM
Page 1: ... i 1 f _ __ _______ ____J ...
Page 62: ...40 English USA KM 110 KM 130 ...