![background image](http://html1.mh-extra.com/html/stihl/hl-km/hl-km_instruction-manual_1378706034.webp)
12
English / USA
KM 110, KM 130
:
Place the secured assembly on the
handle support (
8
) with the wing
screw at the engine side.
:
Push the wing screw into the handle
support as far as stop and then
screw it down – but do not finally
tighten yet.
:
Line up the handlebar at a right
angle to the drive tube – check
dimension
A
again.
:
Tighten down the wing screw firmly
Mounting the Control Handle
:
Loosen the screw (
9
). The nut (
10
)
remains in the control handle (
11
).
:
Push the control handle – throttle
trigger (
12
) must point toward the
gearbox – onto the handlebar (
7
) so
that the holes (
13
) line up.
:
Insert screw and tighten down
firmly.
Fitting the Throttle Cable
Do not kink the throttle cable or lay
it in tight radii – make sure the
throttle trigger moves freely.
:
Press the throttle cable (
14
) into the
retainers (
15
).
Throttle Cable Adjustment
On control handles with slide:
:
Go to chapter "Adjusting the
Throttle Cable".
*
see "Guide to Using this Manual"
002BA234 KN
8
15
14
15
14
15
250BA002 KN
Summary of Contents for HL-KM
Page 1: ... i 1 f _ __ _______ ____J ...
Page 62: ...40 English USA KM 110 KM 130 ...