![background image](http://html1.mh-extra.com/html/stihl/hl-km/hl-km_instruction-manual_1378706035.webp)
13
KM 110, KM 130
English / USA
Swiveling the Handlebar
Transport position:
:
Release the wing screw (
3
) and
unscrew it until the handlebar (
7
)
can be turned clockwise.
:
Turn the handlebar 90° and then
swing the handles down.
:
Tighten down the wing screw firmly.
Working position:
:
Reverse the sequence described
above to swing the handles up
and turn the handlebar counter-
clockwise.
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
Adjust the throttle cable only after
the unit is fully assembled – the
control handle must be in the normal
operating position.
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
:
Press down the trigger interlock (
1
)
and squeeze the throttle trigger (
2
)
(full throttle) – this sets the throttle
cable correctly.
Adjusting the Throttle Cable
002BA163 KN
STOP
249BA017 KN
1
2
Summary of Contents for HL-KM
Page 1: ... i 1 f _ __ _______ ____J ...
Page 62: ...40 English USA KM 110 KM 130 ...