HL 56 K
English
19
N
Pull the starter grip slowly with your
right hand until you feel it engage
and then continue pulling it slowly
and steadily. Do not pull out the
starter rope to full length – it might
otherwise break.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Continue cranking until the engine
runs.
As soon as the engine runs
N
Press down the throttle trigger
lockout and open the throttle – the
choke lever moves to the run
position
F
. After a cold start, warm
up the engine by opening the
throttle several times.
WARNING
Make sure the carburetor is correctly
adjusted. The cutting blades must not
move when the engine is idling.
Your machine is now ready for
operation.
Stopping the Engine
N
Move the stop switch in the direction
of 0 – the engine stops – release
the stop switch – it springs back to
the run position.
Other Hints on Starting
Engine stalls in cold start position
g
or
under acceleration.
N
Move the choke lever to
<
and
continue cranking until the engine
runs.
Engine does not start in warm start
position
<
N
Move the choke lever to
g
and
continue cranking until the engine
runs.
If the engine does not start
N
Check that choke lever is in correct
position.
N
Check that there is fuel in the tank
and refuel if necessary.
N
Check that the spark plug boot is
properly connected.
N
Repeat the starting procedure.
Engine is flooded
N
Move the choke lever to
F
and
continue cranking until the engine
runs.
Fuel tank run until completely dry
N
After refueling, press the manual
fuel pump bulb at least five times –
even if the bulb is already filled with
fuel.
N
Set the choke lever to suit the
engine temperature.
N
Now start the engine.
547BA020 KN
547BA021 KN
Summary of Contents for HL 56 K
Page 2: ...Instruction Manual 1 35 Manual de instrucciones 36 75 ...
Page 78: ...HL 56 K español EE UU 76 ...
Page 79: ......