STIHL FS 94 R
English
31
NOTICE
Replace any damaged parts!
N
Insert felt filter (5) form-fittingly into
the filter housing
N
Set knob for warm start (1) to
g
N
Fit filter cover (3) – make sure not to
tilt the screw (2) – insert screw and
tighten
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
The carburetor of the machine has been
adjusted for optimum performance and
fuel efficiency in all operating states at
the factory.
Setting the idle speed
Engine stops when idling
N
Turn the idle speed adjusting
screw (LA) slowly clockwise until
the engine runs smoothly.
Cutting attachment turns when idling
N
Turn the idle speed adjusting
screw (LA) slowly counterclockwise
until the cutting attachment stops
turning
WARNING
If the cutting attachment continues to
keep rotating in idle even after
adjustment, have the machine checked
by a servicing dealer.
Engine Management
Adjusting the Carburetor
0208BA036 KN
Summary of Contents for FS 94
Page 2: ...Instruction Manual 1 48 Manual de instrucciones 49 99 ...
Page 102: ...STIHL FS 94 R español EE UU 100 ...
Page 103: ......