STIHL FS 94 R
English
28
Starting the Engine
N
Press the manual fuel pump
bulb (5) at least five times – even if
the bulb is filled with fuel.
Cold engine (cold start)
N
Turn choke knob (6) and then push
it in at
g
Also use this setting if the engine has
been running but is still cold.
–
Turn throttle set wheel in direction of
+ as far as stop.
Hot engine (hot start)
N
Choke knob (6) remains in
F
position.
Cranking
N
Place the unit on the ground: It must
rest securely on the engine support
and the deflector.
N
If fitted: Remove the transport guard
from the cutting attachment.
To reduce the risk of accidents, check
that the cutting attachment is not
touching the ground of any other
obstacles.
N
Make sure you have a firm footing,
either standing, stooping or
kneeling.
N
Hold the unit firmly on the ground
with your left hand and press down
– do not touch the throttle trigger,
lockout lever or stop switch.
NOTICE
Do not stand or kneel on the drive tube.
N
Hold the starter grip with your right
hand.
N
Pull the starter grip slowly until you
feel it engage and then give it a brisk
strong pull.
NOTICE
Do not pull out the starter rope all the
way – it might otherwise break.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Continue cranking until the engine
runs.
As soon as the engine runs
At temperatures below +10 °C (+50 °F)
Warm up the engine for at least
10 seconds in position
g
.
At temperatures above +10 °C (+50 °F)
Warm up the engine for at least
5 seconds in position
g
.
5
0208BA029 KN
2.
1.
0208BA030 KN
6
1191BA014 KN
1191BA015 KN
Summary of Contents for FS 94
Page 2: ...Instruction Manual 1 48 Manual de instrucciones 49 99 ...
Page 102: ...STIHL FS 94 R español EE UU 100 ...
Page 103: ......