FS 120, FS 120 R, FS 200, FS 250, FS 250 R
español / EE.UU
93
Sustitución del resorte de rebobinado
roto
N
Quite el rotor de la cuerda de la
forma descrita en "Sustitución de la
cuerda de arranque".
Las partes del resorte aún pueden estar
bajo tensión y podrían desprenderse al
quitar el rotor de la cuerda y la caja del
resorte. Para reducir el riesgo de
lesionarse, póngase un protector facial y
guantes gruesos.
N
Saque los tornillos (7).
N
Retire la caja de resorte y las piezas
del resorte
N
Lubrique el resorte de repuesto
nuevo listo para instalar en la caja
nueva con unas cuantas gotas de
aceite sin resina – vea "Accesorios
especiales".
N
Coloque el resorte de repuesto con
la caja de resorte en su posición – la
placa inferior debe quedar
orientada hacia arriba.
Si el resorte se sale de la caja durante la
instalación: vuélvalo a instalar en
sentido horario - empiece en el exterior
y trabaje hacia el interior.
N
Instale los tornillos.
N
Vuelva a instalar el rotor de la
cuerda de la forma descrita en
"Sustitución de la cuerda de
arranque".
N
Tense el resorte de rebobinado.
N
Instale la caja del ventilador.
Para intervalos de 3 meses o más
N
Vacíe y limpie el tanque de
combustible en una zona bien
ventilada.
N
Deseche el combustible de acuerdo
con los requerimientos locales de
protección del medio ambiente.
N
Haga funcionar el motor hasta que
el carburador se seque. Esto ayuda
a evitar que los diafragmas del
carburador se peguen.
N
Retire, limpie e inspeccione el
accesorio de corte.
N
Limpie la máquina a fondo - preste
atención especial a las aletas del
cilindro y al filtro de aire.
N
Guarde la máquina en un lugar seco
y bajo llave, fuera del alcance de los
niños y de otras personas no
autorizadas.
7
7
271BA053 KN
Almacenamiento de la
máquina