FS 120, FS 120 R, FS 200, FS 250, FS 250 R
English
31
N
Undo the screw (3)
Balance the machine
The machine will balance differently
depending on the cutting attachment
mounted.
Until the conditions listed under
"Hanging positions" are met, carry out
the following steps:
N
Move carrying ring
N
Tighten screw lightly
N
Let the machine swing until it stops
moving
N
Check hanging position
Hanging positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
N
should rest lightly on the ground
Circular saw blades (B)
N
should "hover" approx. 8 in. (20 cm)
above the ground
If the proper handing position has been
attained, then:
N
Tighten the screw on the carrying
ring
Disconnecting the machine from the
harness
N
Press the spring on the snap
hook (1) and remove the carrying
ring (2) from the hook
A
002BA034 KN
B
002BA035 KN