Stihl FCS-KM, Instruction Manual

Page: 14 / 24

FCS-KM
English
12
For periods of 3 months or longer
N
Remove, clean and inspect the
cutting blade.
N
If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
N
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Depth Wheel
N
The end of the thread on the
screw (1) is peened over to ensure
that the wingnut (2) does not work
loose and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.
Removing the skirt
N
Undo and remove the screw (1).
N
Remove the washer (2)
N
Pull the skirt (3) out of the
segment (6) and out of the gap (5) in
the deflector
Storing the Machine Replacing the Depth Wheel
1
239BA023 KN
2
Replacing the Skirt
3
239BA024 KN
1
4
5
6
2