Stihl FCS-KM Page 21 Instruction Manual Download

Page: 21 / 24

FCS-KM

English

ANDREAS STIHL AG & Co. KG

Badstr. 115

D-71336 Waiblingen
Germany
declare under our sole responsibility that

conforms to the relevant provisions of

Directive 2006/42/EC and has been

developed and manufactured in

compliance with the following standards

in the versions valid on the date of

production:
EN ISO 12100 (in conjunction with the

listed KM

and FR

tools)

EN ISO 12100, EN 60335-1, EN 50636-

2-92 (in conjunction with the specified

KMA tools).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG

Produktzulassung
The year of manufacture is specified on

the power tool.

Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp

Dr. Jürgen Hoffmann
Director Product Certification &

Regulatory Affairs

ANDREAS STIHL AG & Co. KG

Badstr. 115

D-71336 Waiblingen
Germany
declare under our sole responsibility that

conforms to the relevant provisions of

the UK Supply of Machinery (Safety)

Regulations 2008 and has been

manufactured in compliance with the

following standards in the versions valid

on the date of production:
EN ISO 12100 (in conjunction with the

listed KM

and FR

tools)

EN ISO 12100, EN 60335-1, EN 50636-

2-92 (in conjunction with the specified

KMA tools).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
The year of manufacture is indicated on

the power tool.

EC Declaration of Conformity

Designation:

KombiTool edger

Make:

STIHL

Series:

FCS

Serial identification

number:

4180

UKCA Declaration of

Conformity

Designation:

KombiTool edger

Make:

STIHL

Series:

FCS

Serial identification

number:

4180

Summary of Contents for FCS-KM

























Search results

Summary of Contents for FCS-KM

Reviews:

Related manuals for FCS-KM

Brands by name

Popular brands

Stihl FCS-KM, Instruction Manual

Search results

Summary of Contents for FCS-KM

Reviews:

Related manuals for FCS-KM

Brands by name

Popular brands