FCS-KM
English
8
operator. This ensures that cuttings and
other debris are directed away from the
power tool and operator.
Edging
N
Start the engine
N
Start the cut at no less than half
throttle and continue cutting at full
throttle.
N
Hold and guide your power tool so
that the blade is vertical.
N
Cut steadily so that the engine is not
lugged down – do not apply force.
N
Operate at no more than a normal
walking pace.
N
Do not push the blade into the
ground.
N
Always walk forwards when cutting,
do not pull the unit towards you.
N
Cut at a steady pace to avoid having
to make several passes.
N
Use the gunning sight (1) to line the
blade up with the edge of the bed.
KombiEngines
Only use KombiEngines supplied or
explicitly approved by STIHL for use with
the attachment.
This KombiTool may be operated only in
combination with the following
KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R,
KM 90, KM 90 R, KM 94 R
1)
, KM 100,
KM 100 R, KM 110, KM 110 R, KM 130,
KM 130 R, KMA 130 R, KMA 135 R
WARNING
Loop-handled machines must be
equipped with a barrier bar.
Brushcutters with split boom
The KombiTool can also be fitted to
STIHL brushcutters with a split boom (T-
models) (basic power tools).
This KombiTool can therefore also be
used on the following machine:
STIHL FR 130 T
WARNING
Refer to the user manual of the power
tool for use of the barrier bar.
257BA008 KN
1
257BA009 KN
Approved KombiEngines
1)
When using the FCS-KM together
with the KM 94 R, the rigid shaft in
the FCS-KM must be replaced by a
flexible shaft.
Summary of Contents for FCS-KM
Page 1: ...STIHL FCS KM Instruction Manual ...
Page 2: ......
Page 23: ......
Page 24: ...www stihl com 04584720121D 0458 472 0121 D 0458 472 0121 D englisch G ...