![background image](http://html1.mh-extra.com/html/stihl/e-140/e-140_service-manual_1378832007.webp)
Important:
The electrical safety of
the saws should be checked after
every
repair by performing a high-
voltage insulation test. Tests of
this kind may only be carried out
by electricians or specially trained
personnel.
Always unplug the machine from
the mains supply.
- Remove the quick chain
tensioner, if fitted -
see 7.3.
•
Unscrew nut.
- Remove the chain sprocket
cover.
Models with quick chain
tensioner
•
Take out screws (1).
•
Remove the spiked bumper (2).
All models
- Remove the chain sprocket -
see 6.1.
•
Unscrew oil filler cap and remo-
ve together with cap retainer.
•
Take out the screws.
- Remove the handle housing.
•
Take out the O-ring.
- Place a socket (e.g. 19mm)
under the handle housing so that
it supports the bearing bush from
outside.
•
Use drift (1) 1111 893 4700 to
press needle sleeve out of
bearing bush.
•
Take out the screws.
- Remove the strain relief cable
clamp.
100RA005
VA
100RA008
1
VA
100RA004
2
1
1
VA
100RA003
VA
4.
Removing and Installing Electrical Components
4.1
Connecting Cord
100RA007
VA
100RA006
VA
100RA009
VA
6