Stihl E 140, Service Manual

Page: 24 / 25

10. Special Servicing Tools and Aids
10.1 Special Servicing Tools
No. Part Name Part No. Application Rem.
1 Assembly tube 1117 890 0900 Attaching springs
2 Screwdriver T20x100 5910 890 2301 Releasing IS screws 1)
3 Spline screw socket T20x120 0812 542 2041 Tightening IS screws
4T-handle screwdriver
QI-T27x150
5910 890 2400 Releasing IS screws, installing 1)
stator
5 Spline screw socket T27x125 0812 542 2104 Tightening IS screws
6 Torque wrench 5910 890 0301 0.5 - 18 Nm 2)
(0.4 - 13.5 lbf.ft)
5910 890 0302 3)
7 Torque wrench 5910 890 0311 6 - 80 Nm 2)
(4.4 - 60 lbf.ft)
5910 890 0312 3)
8 Assembly stand 5910 890 3100 Holding saw for servicing
9 Crimping tool 5910 890 8210 Attaching connectors to electrical
wires
10 Assembly drift 1111 893 4700 Removing needle sleeve
from handle housing
11 Press arbor 4116 893 7205 Installing needle sleeve
in handle housing
Remarks:
1) On Plastoform screws, use for releasing only.
2) Always use torque wrench to tighten Plastoform screws.
3) Wrench has optical/acoustic signal.
10.2 Servicing Aids
No. Part Name Part No. Application
1 Medium-strength threadlocking 0786 111 1101 Slotted nut for pinion
adhesive (Loctite 242)
2 High-strength threadlocking 0786 110 0126 Securing brake drum
adhesive (Loctite 648)
3 Standard commercial, Cleaning rotor shaft stub and
solvent-based degreasant slotted nut
containing no chlorinated or
halogenated hydrocarbons
4 Lubricating grease 0781 120 1111 Sliding and pivot points, pin in oil pump
5 Molybdenum grease (eg. Molykote) Pivot points of chain brake
6 Multipurpose grease 0781 120 1109 Ring gear and washers
7 Electrician’s repair kit 0000 007 1013
E 140, E 160, E 180 23