![background image](http://html1.mh-extra.com/html/stihl/e-140/e-140_service-manual_1378832010.webp)
•
Pull off the terminal.
•
Pull overload circuit breaker out
of the motor housing.
Install in the reverse sequence.
•
Use new wire end ferrule to join
the wire from the switch and
capacitor and push into the retai-
ners in the motor housing.
- Remove the handle housing -
see 4.1.
•
Remove the wires from the
brake switch terminals.
•
Lift snap hook (1) a little and
then pull out the chain brake
switch (2).
Install in the reverse sequence.
100RA022
VA
100RA025
VA
1
2
100RA021
VA
100RA023
VA
100RA024
VA
4.5
Chain Brake Switch
9