![background image](http://html.mh-extra.com/html/stihl/5910/5910_instruction-manual_1379511022.webp)
MDG 1
English
20
–
Make sure the contacts are firmly
seated – grounding clips must
engage spark plug's hexagon.
–
Pull off the boot – turn slightly
counterclockwise and remove.
–
On chain saws with a one-piece
shroud, mount the cover and
cutterless chain to reduce the risk of
injury from the rotating fanwheel
and risk of engine damage due to
overheating.
–
Clip the cover the the front handle –
cover must locate against outside of
fan housing.
–
On chain saws on which the clutch
drum or spur sprocket is exposed
after connecting the analyzer,
mount the cover and cutterless
chain to reduce the risk of injury.
–
On chain saws on which the air filter
cannot be held in place by the
carburetor box cover after
connecting the analyzer: Secure air
filter with nut (1138 140 9500) to
reduce the risk of engine damage.
–
Wear personal protective
equipment.
–
Fuel, prepare and start the power
tool as described in the instruction
manual.
–
Never run the engine indoors or in
poorly ventilated locations – risk of
fatal injury from breathing toxic
fumes.
–
Carry out adjustments with extreme
care because of the increased risk
of accidents and injury – improper
handling can result in burns and
other serious injuries.
–
User entries in the computer are not
possible during the test with the
engine running – the test run is
finished by shutting off the engine.
N
Unplug the power supply unit.
N
Disconnect the diagnostic cable and
power cord from the analyzer.
N
Keep the analyzer, power supply
unit, diagnostic cable and power
cord in the case supplied and store
it in a dry, locked and safe location.
N
Keep it out of the reach of children
and other unauthorized persons
and protected from contamination.
5901BA010 KN
1.
2.
5901BA007 KN
5901BA008 KN
Storing the Analyzer