9
Fault
Cause
Rectification
No hot water despite the hot water
valve being fully opened.
No electricity supply on water
heater.
User/qualified installer: Check the fuses in the house installation.
Poor jet formation, fitting spurts
when tap is turned on.
Jet regulator blocked with limes-
cale.
User/qualified installer: Clean the jet regulator of the fitting and replace
it if necessary.
Fitting drips during heating up pro-
cess.
Expansion water
Normal occurrence with non-pressurised water heaters. Dripping will
stop when the heating up process has been completed.
3. Fault rectification
for the user and qualified installer
English
4. Environment and recycling
Dispose of packing material and appliances
The dispose of the packing material and the
appliances must be done according to the lo-
cal recycling laws and regulations.
For guarantees please refer to the pespective
terms and conditions of supply for your country.
The installation, electrical connection
and first operation of this appliance
should be carried out by a qualified installer.
The company does not accept liability for
failure of any goods supplied which accor
dance with the manufacturer‘s instructions.
5. Guarantee