![background image](http://html1.mh-extra.com/html/stiebel-eltron/mae-185476/mae-185476_operating-and-installation-instructions_1377174008.webp)
5
6
11.4
9
10
1
2
4
3
5
8
7
6
11
12
13
1
2
3
SW 22
12
7
4
8
9
10
13
11.2
11.3
11.1
9004.01
9005.01
6
4
5
3
1
2
9003.01
11
(SW 13)
(SW 13)
SW 19
SW 24
SW 30
8
1. Operating instructions
for the user and the professional
1.1 Description
Fittings MAE, MAZ and MAW are intended for use with the open mini instantaneous water heater DNM.
1.2 Safety Notes
The open outlet prevents a pressure build-up at the heater. The outlet must not therefore be closed. Effervescing units or hoses with jet regulators
must not be fitted.
1.3 Care and Maintenance
To clean the fitting use soap-based cleaners only. Do not use any abrasive or solvent cleaners or disinfectants. Remove limescale from calcified jet
regulators.
1.4 Important Note
Keep these instructions carefully and pass on to any new user.
Show these instructions to the expert when any repairs are performed.
1.5 MAE
1.5.1 Components
1
Handle
2
Fitting body
3
Special jet regulator
(As spare part: complete installation kit
Order number 25 45 68)
4
Connection hose KW -
×
blue
5
Connection hose 3/8“ -
Ø
blue
6
Connection hose 3/8“ -
×
red
7
Sealing ring
8
U-shaped washer
9
U-shaped thrust washer
10
Clamping sleeve (SW 13)
11
Fitting the drain
11.1
Drain
sleeve
11.2
Seal
11.3
Shaped
seal
11.4
Tundish
12
Plug rod
13
Hinge piece
1.7.2 Operation
The single lever washbasin fitting is operated
by swivelling the handle (
1
) in two planes.
Left / right for „hot / cold“ and raise / lower
for „on / off“.
1.6 MAZ
1.6.1 Components
1
Hot tap
2
Cold tap
3
Fitting body
4
Special jet regulator
(As spare part: complete installation kit
Order number 25 45 74)
5
Swivel outlet
6
Connection hose KW
×
blue
7
Connection hose 3/8“ -
Ø
blue
8
Connection hose 3/8“
×
red
9
Sealing ring
10
Spacer
11
U-shaped washer
12
U-shaped thrust washer
13
Clamping sleeve (SW 13)
1.6.2 Operation
For the washbasin fitting, set the desired water
quantity and temperature by opening both
taps (
1
and
2
).
1.7 MAW
1.7.2 Components
1
Hot tap
2
Cold tap
3
Fitting body
4
Special jet regulator
(As spare part: complete installation kit
Order number 25 45 74)
5
Swivel outlet
6
Wall covering plate
1.5.2 Operation
For the twin-tap wall fitting, set the desired
water quantity and temperature by opening
both taps (
1
and
2
).