![background image](http://html1.mh-extra.com/html/stiebel-eltron/dhe-18/dhe-18_operation-and-installation_1376619032.webp)
INSTALLATIoN
Installation alternatives
86
| DHE
www.stiebel-eltron.com
13.2 Electrical connection on unfinished walls from
below with short power cable
D
00000
60
38
7
f
f
Reposition the mains terminal further downwards. To do this,
undo the fixing screw. Secure the mains terminal in place.
13.3 Electrical connection on finished walls
Note
This type of connection changes the IP rating of the ap-
pliance.
f
f
Change the type plate. Cross out "IP 25" and mark
the box "IP 24". Use a ballpoint pen to do this.
A
30
D
00000
76
50
6
1
1 Cable grommet
Electrical connection on finished walls
Dimension A
Positioned in lower section of appliance
160
Positioned in upper section of appliance
110
f
f
Prepare the power cable. Fit the cable grommet.
!
Material losses
If you break out the wrong knock-out in the back panel/
appliance cover by mistake, you must use a new back
panel/appliance cover.
f
f
Cleanly cut and break out the required cable entries from the
back panel and appliance cover (for the positions, see chap-
ter "Specification / Dimensions and connections"). Deburr any
sharp edges with a file.
f
f
Route the power cable through the cable grommet.
f
f
Connect the power cable to the mains terminal.