![background image](http://html1.mh-extra.com/html/stiebel-eltron/dhe-18/dhe-18_operation-and-installation_1376619023.webp)
www.stiebel-eltron.com
DHE |
77
INSTALLATIoN
Installation
EN
GL
ISH
f
f
Open the appliance by holding the fascia at the side and pull-
ing forwards away from the appliance cover. Undo the screw.
Pivot open the appliance cover.
D
00000
53
27
2
f
f
Remove the back panel by pressing the two locking tabs and
pulling the lower back panel section forwards.
Preparing the power cable on unfinished walls, for connection
from below
160
30
D
00000
53
27
3
1
1 Cable entry installation aid
f
f
Prepare the power cable.
Fitting the wall mounting bracket
D
00000
59
69
4
f
f
Mark out the holes for drilling using the installation tem-
plate. If the appliance is to be installed on finished walls, also
mark out the fixing hole in the lower section of the template.
f
f
Drill the holes and secure the wall mounting bracket at 2
points using suitable fixing materials (screws and rawl plugs
are not part of the standard delivery).
f
f
Fit the wall mounting bracket.
Installing the twin nipples
!
Material losses
Carry out all water connection and installation work in
accordance with regulations.