www.stiebel-eltron.com
DHE |
83
INSTALLATIoN
Commissioning
EN
GL
ISH
D
00000
73
19
8
f
f
Connect the programming unit connecting cable to the PCB.
Note
For undersink installation, the appliance cover should be
turned the other way up for easier operation; see chapter
"Installation alternatives / Rotated appliance cover".
D
00000
53
28
0
f
f
Hook the appliance cover at the top rear into the back panel.
Pivot the appliance cover downwards. Check that the appli-
ance cover is securely seated both top and bottom.
f
f
Tick the selected connected load and rated voltage on the ap-
pliance cover type plate (on both sides). Use a ballpoint pen
to do this.
f
f
Secure the appliance cover with the screw.
f
f
Fit the fascia to the appliance cover.
f
f
Remove the protective film from the user interface.
D
000
00
53
28
1
f
f
Switch on the power supply.
11.2.1 Appliance handover
f
f
Explain the appliance function to users and familiarise them
with how it works.
f
f
Make the user aware of potential dangers, especially the risk
of scalding.
f
f
Hand over the instructions.