background image

8 |  

AWG 315-600

INSTALLATION 

General information

1.  General information

This document is for contractors.

 

Note

Read these instructions carefully before using the ap-

pliance and retain them for future reference.

Pass on the instructions to a new user if required.

f

f

This symbol indicates that you have to do something. The 

action you need to take is described step by step.

1.1  Relevant product

This document describes the installation of the following wall 

outlets:

Wall outlet

Part number

AWG 315 L

231039

AWG 560 L

231041

AWG 600 L

231044

AWG 315 GL

232955

AWG 560 H-GL

232956

AWG 560 V-GL

232957

AWG 315 SR

233836

AWG 560 H-SR

233837

AWG 560 V-SR

233838

1.2  Further applicable documents

 

 

Operating and installation instructions of the heat 

pump or air conditioning unit

1.3  Units of measurement

 

Note

All measurements are given in mm unless stated oth-

erwise.

2.  Safety

Only qualified contractors should carry out installation, com-

missioning as well as maintenance and repair of the product.

 

WARNING Injury

The discharged cold air can cause condensation to 

be formed in the vicinity of the air outlet.

f

f

Ensure that no risk of slipping due to ice forma-

tion occurs on adjacent footpaths and drive-

ways during low temperatures.

!

 

CAUTION Injury

This product has sharp edges which can cause cuts 

unless handled with care.

f

f

Take care when handling objects with sharp 

edges and wear protective equipment including 

gloves.

 

Note

Observe all applicable national and regional regula-

tions and instructions.

3.  Product description

This product is used as a wall outlet for the outside air or dis-

charge air duct from heat pumps or air conditioning units. 

Products AWG L are intended for installation in cellar ducts.
The product can be used in wall knock-outs with any wall con-

struction.
The product features a weather grille. Behind this is a fine 

meshed grille designed to prevent animals getting in.

3.1  Standard delivery

AWG 315 GL / AWG 315 SR

26

_0

3_

14

_0

07

4

1

2

3

4

5

1  Weather grille

2  Insert

3  Wall outlet

4  Hose clip with tensioning closure

5  Insulating mat

AWG 560 H-GL / AWG 560 H-SR

26

_0

3_

14

_0

07

5

1

2

3

4

1  Weather grille

2  Insert

3  Wall outlet

4  Hose clip with tensioning closure

Summary of Contents for AWG 315 GL









Reviews: