10 |
AWG 315-600
INSTALLATION
mounting
4.2 Fitting the wall outlet
f
f
make an opening in the wall (see "Specification")
AWG 315 GL / AWG 315 SR / AWG 315 L / AWG 600 L
26
_0
3_
14
_0
07
8
AWG 560 H-GL / AWG 560 H-SR / AWG 560 V-GL /
AWG 560 V-SR / AWG 560 L
26
_0
3_
14
_0
07
9
Push the parts of the installation aid together at the cut-out
points.
f
f
Position the installation aid in the wall outlet.
The installation aid stops the wall outlet becoming deformed
as you carry out the next steps.
f
f
Insert the wall outlet into the opening in the wall.
The oval connector, or round connector for AWG 315 and 600,
must be facing the inner surface of the building. We recom-
mend installing the wall outlet in such a way that it is posi-
tioned flush with the inner surface of the building.
f
f
Seal the space between the wall and wall outlet, e.g. using
a foam sealant.
f
f
Once the seal is complete, e.g. when the foam sealant has
hardened, remove the installation aid from the wall outlet.
Note
carry out the following steps once the outer wall of
the building is complete, after the external rendering
or brickwork has been applied to the house.
D
00000
36
42
9
4.3 Trimming the insulation
Depending on the thickness of the building envelope, the in-
sulation mats prefitted in the wall outlet may need trimming.
50
26
_0
3_
14
_0
07
0
f
f
Trim the insulation mats until they end 50 mm within the
outside edge of the wall.
4.4 Fitting the insert
f
f
Push the insert into the wall outlet. The insert is designed
in such a way that part of the insulation mat is pressed
outwards, which seals the wall outlet.
4.4.1 AWG 315 GL / AWG 315 SR / AWG 315 L: Affixing the
insulating mat
D
00000
58
22
5
3
2
1
1 Rear of the wall outlet
2 Insulating mat which must be affixed to the floor of the
wall outlet
3 Insulating mat in the insert, affixed at factory
Insulating mats are affixed to the four walls of the insert at the
factory. The insulating mat included in the standard delivery
must be affixed behind the insert, to the floor of the wall outlet.
f
f
measure the depth of insulation required from the rear of
the wall outlet to the edge of the insulating mat affixed to
the insert.
