background image

 17 West St., W. Hatfi eld, MA 01088 

|

 800.582.8423 

|

 413.247.3380 

|

 fax 413.247.3369 

|

 [email protected] 

|

 www.stiebel-eltron-usa.com

Simply the Best

INSTALLATION INSTRUCTIONS 

SOL 27 PREMIUM S & W COLLECTORS - 230016 & 230017

to the weather must also be checked periodically for their 
condition. Look for signs of abrasion, wear, corrosion, 
contamination, or damage. Check the pH value (> 7) and 
frost protection level (< -20°F) of the heat transfer medium 
annually.

8 Warranty

Stiebel eltron warrants to the original owner that the sol 27 
premium - fl at plate solar collector will be free from defects 
in workmanship and materials for a period of ten (10) years 
from the date of purchase.
Should the part(s) prove to be defective under normal use 
during this period, stiebel eltron, inc. Will be responsible for 
replacement of the defective part(s) only. Stiebel eltron, inc. 
Will not be liable for any costs of transportation, removal, 
reinstallation, or any other labor or freight charges that may 
arise in connection with a warranty claim or any incidental 
or consequential expenses.

This warranty does not apply: 

1.  

To conditions resulting from a failed component or    

 

part that is not part of the solar collector or absorber  

 plate.

2. 

To freeze damage.

3.  

To conditions resulting from misuse, abuse,   

 

 

neglect, accident, or alteration.

4. 

To minor discoloration of the collector framewall  

 

 

or absorber plate.

5. 

To glass breakage.

6.  

To conditions resulting from the introduction of  

 

 

harmful chemicals, caustic fl uids, or liquids deleterious  

 

to copper tubing, including improperly applied or  

 

 

maintained heat transfer fl uids.

 
7. 

To propylene glycol ph levels above 10 or below 8.

 

8.   To periods of stagnation in excess of 60 days.

 
 

9.   To excessive pressure.

 

10.  To clouding or similar occurrence resulting from   

 

 

the normal intrusion of moisture into.

 

11.  To conditions resulting from fl oods, earthquakes,  

  

winds, 

fi re, lightning, or circumstances beyond the  

  

manufacturer‘s 

control.

 

12.  To installation methods which do not conform to   

 

 

relevant national, state or local.

 

Codes and ordinances, good industry practices or 

applicable manuals, diagrams, technical bulletins or  

 

written installation instructions; and, to applications other 
than medium temperature.

To obtain service under this warranty, the owner must fi rst 
secure written authorization from stiebel eltron, inc. The 
owner shall be required to show proof of purchase date, and 
to pay all transportation costs to return the defective part(s) 
for repair or replacement.

 

For any service or warranty related issue, contact 
Stiebel Eltron at:

            

800.582.8423

17 West Street
West Hatfi eld, MA 01088

TOLL FREE 

800.582.8423

PHONE 

413.247.3380

FAX 

413.247.3369

info

@

stiebel-eltron-usa.com

www.stiebel-eltron-usa.com

Printed on recycled chlorine-free paper with soy-based inks.

Due to our continuous process of engineering and technological 
advancement, specifi cations may change without notice.

Summary of Contents for 230016



















Reviews: