Stewart Filmscreen –
Balón
9
FLUSH MOUNT BRACKET SYSTEM
Note: Professional mounting techniques should be used. Stewart Filmscreen cannot be liable for
substandard or faulty installations. Failure to comply with the instructions and guidance contained
in this manual may result in voiding your warranty.
To accurately position the Balón Series frame, you will need to mount the Flush Mount hanging bar
and temporarily hang the frame prior to attaching the screen material.
Note:
The screen material should not be attached to the frame at this point.
1.
Identify the location of wall studs where you can securely mount the Flush Mount hanging bar.
2.
Use a level to accurately position the Flush Mount hanging bar on the wall.
3.
Drill holes through the bar into the studs.
4.
Use the provided 2” screws or other appropriate fasteners to secure the Flush Mount hanging bar
to the wall studs
(see Figure 3).
Figure 3: Flush Mount hanging bar
Note: A minimum of three (3) screws are recommended to safely secure the frame.
5.
Check to
make sure the bar is level.
