Stewart Filmscreen –
Balón
10
FLUSH MOUNT BRACKET SYSTEM (CONT.)
6.
Without the screen attached, hang the assembled frame onto the Flush Mount hanging bar to
ensure that it is correctly mounted (see Figure 4).
Figure 4: Cross section of frame mounted on Flush Mount hanging bar
7.
Remove the frame and follow the steps for attaching the screen to the frame.*
(For vinyl & woven snap material, refer to page 15. For BlackHawk UST lace and grommet material,
refer to page 16).
*
Note:
If an LED kit was purchased, please follow the install guide on the next page before
proceeding to screen attachment.
