Stewart Filmscreen –
Balón
20
INSTALLATION TROUBLE SHOOTING
(Vinyl) screen material doesn’t fit or it seems too small (see Figure 15).
1.
Make sure the screen material has been correctly installed onto the screen frame. Refer to
pages 15-16.
2.
If screen was installed starting with the middle snaps, the whole screen must be
removed/unsnapped and reinstalled starting with the snaps on the corners of the screen.
Note: The snaps on the frame may have moved from the first installation. Make sure
corners are in place and snapped first. To determine final position of snaps on rail, start
with the middle snap on each side.
Figure 15: Example of overstretched screen material
Screen corner being pulled
from the opposite end
causing this corner to be
pulled into the image area
